Paper backed veneer

Both of the above can be ordered with our optional 3M peel and stick adhesive Paper Backs Or Wood Backs Add Strength And Stability In order to give the veneer sheets more strength and stability, we bond them permanently to either a paper back or a wood veneer back.

Paper backed veneer

Then, per your local building codes, install lath or mesh using galvanized nails or staples 6" on center vertically and 16" on center horizontally, penetrating the studs a minimum of 1".

Stop lath from the finished edges.

Paper backed veneer

To ensure that its finished surface contains no release agents such as form oilcheck newly poured concrete. If it does contain form oil, treat the surface with muriatic acid, rinse thoroughly and score with a wire brush.

Securely attach lath with concrete nails, or 2. Figure 3 Please note: QuarryCut thin stone by definition is an adhered stone supported through the adhesion of an approved bonding material applied to an approved backing.

Lath shall be minimum 2.

Paper backed veneer

Verify that all flashings have been installed properly and integrate with the water resistive barrier to prevent water penetration into the structure.

It is important to recognize that QuarryCut thin stone is a natural veneer, a facing attached to the wall for purposes of providing ornamentation.

Wood Veneer Tutorials

It is not intended as a structural product or a waterproofing element. Most importantly, the real expert is your local building department and local building code.The 3/64" wood backed veneer is also called "2 ply veneer" because it is made using 2 sheets of veneer that are glued back to back.

The only differences between the 1/64" paper backed veneers and the 3/64" wood backed veneers are the thickness, and the type of back. 2'x8' Paper Backed Veneer.

Fleece Edge Preglued Veneer Coils

Wood Veneer, Walnut, Flat Cut, 2x8, PSA Backed. by Veneer Tech. $ $ 58 FREE Shipping on eligible orders. out of 5 stars Product Features 10 mil ") paper backer for easy handling.

Maple Wood Veneer Rotary Spliced 2'x8' 10 mil Sheet. by Wood-All. Paper Backed Veneer: 2' x 8' Learn more about paper backed veneer on this page of the JoeWoodworker website where you'll find answers to more than 25 common questions about paper backed and 2-ply veneer.

All of our paper-backed veneer sheets are made from the finest wood veneer for outstanding character and figure. Premium wood veneers are permanently bonded to a resin saturated backing which allows maximum flexibility. This shopping feature will continue to load items.

In order to navigate out of this carousel please use your heading shortcut key to navigate to the next or previous heading.

This was my first attempt at using veneer (I'm a novice wood butcher)and found this product to be an excellent choice. I was a bit concerned about how well it would stand up to shipping, but it came through without any damage - well packed by Ovis.

STS Coatings | HeatBloc, Roof Guardian, Wall Guardian, Great Seal